Home/Docking

A selection of items available. Full installs available; please contact us with your requirements for a custom quote.

  • Out of stock
  • Out of stock
  • BOAT LIFT 7 OUR BOAT LIFT 7 IS ADAPTED FOR BOATS AND RIBS UP TO 7,00M LONG. It’s built out of modular floating cubes 50 x 50 x 40cm and body parts 100 x 100cm equipped with horizontal and lateral rollers. The entry part is V-shaped with a 1st roller at water level. At the end of the boat lift, the head part features a raised bow to avoid overshooting, but also to attach a winch if the size and weight of the boat require. U EXTENSION : 2 SIDES AND FRONT Head part : 1 Body part : 5 V-shaped Entrance part : 1 Cubes : 64 Connecting pins : 23 Couplers : 35 Double disks : 5
  • BOAT LIFT 8 OUR BOAT LIFT 8 IS ADAPTED FOR BOATS AND RIBS UP TO 8,00M LONG. It’s built out of modular floating cubes 50 x 50 x 40cm and body parts 100 x 100cm equipped with horizontal and lateral rollers. The entry part is V-shaped with a 1st roller at water level. At the end of the boat lift, the head part features a raised bow to avoid overshooting, but also to attach a winch if the size and weight of the boat require. STANDARD MODEL Head part : 1 Body part : 6 V-shaped Entrance part : 1 Cubes : 34 Connecting pins : 0 Couplers : 33 Double disks : 3
  • BOAT LIFT 8 OUR BOAT LIFT 8 IS ADAPTED FOR BOATS AND RIBS UP TO 8,00M LONG. It’s built out of modular floating cubes 50 x 50 x 40cm and body parts 100 x 100cm equipped with horizontal and lateral rollers. The entry part is V-shaped with a 1st roller at water level. At the end of the boat lift, the head part features a raised bow to avoid overshooting, but also to attach a winch if the size and weight of the boat require. I EXTENSION : 1 SIDE Head part : 1 Body part : 6 V-shaped Entrance part : 1 Cubes : 50 Connecting pins : 15 Couplers : 35 Double disks : 4
  • BOAT LIFT 8 OUR BOAT LIFT 8 IS ADAPTED FOR BOATS AND RIBS UP TO 8,00M LONG. It’s built out of modular floating cubes 50 x 50 x 40cm and body parts 100 x 100cm equipped with horizontal and lateral rollers. The entry part is V-shaped with a 1st roller at water level. At the end of the boat lift, the head part features a raised bow to avoid overshooting, but also to attach a winch if the size and weight of the boat require. L EXTENSION : 1 SIDE AND FRONT Head part : 1 Body part : 6 V-shaped Entrance part : 1 Cubes : 55 Connecting pins : 19 Couplers : 37 Double disks : 4
  • BOAT LIFT 8 OUR BOAT LIFT 8 IS ADAPTED FOR BOATS AND RIBS UP TO 8,00M LONG. It’s built out of modular floating cubes 50 x 50 x 40cm and body parts 100 x 100cm equipped with horizontal and lateral rollers. The entry part is V-shaped with a 1st roller at water level. At the end of the boat lift, the head part features a raised bow to avoid overshooting, but also to attach a winch if the size and weight of the boat require. U EXTENSION : 2 SIDES AND FRONT Head part : 1 Body part : 6 V-shaped Entrance part : 1 Cubes : 72 Connecting pins : 25 Couplers : 39 Double disks : 5
  • OUR BOAT LIFT 6 IS ADAPTED FOR BOATS AND RIBS UP TO 6,00M LONG. It’s built out of modular floating cubes 50 x 50 x 40cm and body parts 100 x 100cm equipped with horizontal and lateral rollers. The entry part is V-shaped with a 1st roller at water level. At the end of the boat lift, the head part features a raised bow to avoid overshooting, but also to attach a winch if the size and weight of the boat require. U EXTENSION : 2 SIDES AND FRONT Head part : 1 Body part : 4 V-shaped Entrance part : 1 Cubes : 56 Connecting pins : 21 Couplers : 31 Double disks : 5
  • BOAT LIFT 7 OUR BOAT LIFT 7 IS ADAPTED FOR BOATS AND RIBS UP TO 7,00M LONG. It’s built out of modular floating cubes 50 x 50 x 40cm and body parts 100 x 100cm equipped with horizontal and lateral rollers. The entry part is V-shaped with a 1st roller at water level. At the end of the boat lift, the head part features a raised bow to avoid overshooting, but also to attach a winch if the size and weight of the boat require. STANDARD MODEL Head part : 1 Body part : 5 V-shaped Entrance part : 1 Cubes : 30 Connecting pins : 0 Couplers : 29 Double disks : 3
  • BOAT LIFT 7 OUR BOAT LIFT 7 IS ADAPTED FOR BOATS AND RIBS UP TO 7,00M LONG. It’s built out of modular floating cubes 50 x 50 x 40cm and body parts 100 x 100cm equipped with horizontal and lateral rollers. The entry part is V-shaped with a 1st roller at water level. At the end of the boat lift, the head part features a raised bow to avoid overshooting, but also to attach a winch if the size and weight of the boat require. I EXTENSION : 1 SIDE Head part : 1 Body part : 5 V-shaped Entrance part : 1 Cubes : 44 Connecting pins : 13 Couplers : 31 Double disks : 4
  • BOAT LIFT 7 OUR BOAT LIFT 7 IS ADAPTED FOR BOATS AND RIBS UP TO 7,00M LONG. It’s built out of modular floating cubes 50 x 50 x 40cm and body parts 100 x 100cm equipped with horizontal and lateral rollers. The entry part is V-shaped with a 1st roller at water level. At the end of the boat lift, the head part features a raised bow to avoid overshooting, but also to attach a winch if the size and weight of the boat require. L EXTENSION : 1 SIDE AND FRONT Head part : 1 Body part : 5 V-shaped Entrance part : 1 Cubes : 49 Connecting pins : 17 Couplers : 33 Double disks : 4
  • The locking key is the tool to lock the connecting pins and tighten the cubes. Made of galvanized steel.
  • Modular floating cubes are made of high density polyethylene. They are blow molded. Available in beige, blue, grey, black and orange, our cubes can also fit your specific color needs, subject to a minimum quantity. Dimensions: 50cm x 50cm x 40cm Weight: 6.5 kg Flotation: 87.5 kg FLEXIBILITY, MODULARITY AND EXCEPTIONAL FLOATATION Nos cubes flottants modulaires peuvent s'adapter à tous les plans d'eau et à tous les projets The assembly by connecting pins every 50cm gives a pontoon made of cubes ​​incredible flexibility, reducing its resistance to waves and allowing it to withstand exceptional tidal conditions and weather. This foolproof flexibility is undeniably the great strength of these pontoons that can be installed in the open sea or any other body of water exposed to difficult conditions. With a load capacity of 87,5kg per cube (model A), this solution also offers exceptional buoyancy of 350kg/ m², which value may be multiplied by 2 or 3 by stacking layers of cubes. In addition, total modularity allows it to adapt to all sites for all projects, but also to all budgets. If this criterion is essential in the development of your project, our double cubes and double cubes with low freeboard will grab your attention.
  • Polyethylene cleat for modular floating cubes. To be attached on 1 cube ear.
  • Ref: CDS-01531a This anchoring system consists in a tube in L-form, 2 clamps and a brackets of galvanized steel. The tube (90,00m diameter, 2,00m lenght), which is fixed to the dock with two adaptable clamps (screws not included), slides in the bracket (SDS-07710) which is fixed on the ears of the cubes.
  • Tube spanner is a galvanized steel tool which allows screwing the different elements of a boat lift (entry part, body part and head part) to the structure realized in floating cubes. The fastening is made with screws, nuts and compensation washers placed on the fixation ears of the cubes.
  • Ref: SDS-07100 Anchor ring in galvanized or stainless steel. Allows stowage of a chain or rope to a dead-weight, sand screw, anchor, directly to a dock or shore, etc. Attaches to the ears of the cube.
  • This winch makes the dry-docking of your boat easier, if dimensions and weight of the machine need it. Fixing tube in aluminum.
  • Ref: SDS-01030 Allows to secure the pontoon to 90mm section piles to be screwed. Available in beige and blue.
  • OUR BOAT LIFT 6 IS ADAPTED FOR BOATS AND RIBS UP TO 6,00M LONG. It’s built out of modular floating cubes 50 x 50 x 40cm and body parts 100 x 100cm equipped with horizontal and lateral rollers. The entry part is V-shaped with a 1st roller at water level. At the end of the boat lift, the head part features a raised bow to avoid overshooting, but also to attach a winch if the size and weight of the boat require. STANDARD MODEL Head part : 1 Body part : 4 V-shaped Entrance part : 1 Cubes : 26 Connecting pins : 0 Couplers : 25 Double disks : 3
  • Ref: SDS-07710 Bracket in galvanized or stainless steel, 2 anchor points on the ears of 1 cube, 30cm diameter to anchor on piles
  • OUR BOAT LIFT 6 IS ADAPTED FOR BOATS AND RIBS UP TO 6,00M LONG. It’s built out of modular floating cubes 50 x 50 x 40cm and body parts 100 x 100cm equipped with horizontal and lateral rollers. The entry part is V-shaped with a 1st roller at water level. At the end of the boat lift, the head part features a raised bow to avoid overshooting, but also to attach a winch if the size and weight of the boat require. I EXTENSION : 1 SIDE Head part : 1 Body part : 4 V-shaped Entrance part : 1 Cubes : 38 Connecting pins : 11 Couplers : 27 Double disks : 4
  • Polyethylene bumper for modular floating cubes. Fixed to the pontoon with a connecting pin and a coupler set on two cube’s ears
  • OUR BOAT LIFT 6 IS ADAPTED FOR BOATS AND RIBS UP TO 6,00M LONG. It’s built out of modular floating cubes 50 x 50 x 40cm and body parts 100 x 100cm equipped with horizontal and lateral rollers. The entry part is V-shaped with a 1st roller at water level. At the end of the boat lift, the head part features a raised bow to avoid overshooting, but also to attach a winch if the size and weight of the boat require. L EXTENSION : 1 SIDE AND FRONT Head part : 1 Body part : 4 V-shaped Entrance part : 1 Cubes : 43 Connecting pins : 15 Couplers : 29 Double disks : 4
  • The connecting pin is used to secure the cubes together. It is simply inserted into the superposed ears and screwed with the locking key. Available in beige, grey and blue.
  • Tool for tightening nuts and bolts. Galvanized steel.
  • Screw and nut used to secure the cubes on the periphery of a pontoon to increase the resistance. To be used with washers to compensate for differences in height between the ears.
  • Galvanised steel cleat for modular floating cubes. To be attached on 1 cube ear.
  • Out of stock
    SAND SCREW Ref: VS 100 1P15 1,5m galvanized steel sand screw. To be screwed manually. Allows anchoring by chains or ropes being attached to the dock sections through stainless steel brackets (RDS-07410) or polyethylene brackets (RDS-07101). Available in different sizes with various numbers of disks (depending on nature of anchoring).
  • Out of stock
  • Out of stock
  • Out of stock
  • Out of stock