Home/RDS-01050 JET SKI DOCK : JET PORT ®

RDS-01050 JET SKI DOCK : JET PORT ®

£ 1,530.00

Out of stock

Jet Port with 8 optional side rollers

Dimensions: 3,96m x 1,50m x 38cm
Weight: 140kg
Flotation: 630kg
Ref. Article : RDS-01050
Material: low density polyethylene

Out of stock

SKU: RDS-01050 Category:

Description

THE JET PORT® JET SKI DOCK HAS 5 CENTRAL ROLLERS AND 8 SIDE ROLLERS. IT MASSIVELY SIMPLIFIES GETTING MACHINES IN AND OUT OF THE WATER
The Jet Port® Jet Ski Dock benefits from the following features:

5 central rollers and 8 optional side rollers
All rollers are clipped, removing hardware and therefore the risk of rust
Increased length of 16cm to fit the ever-changing machines
Handle integrated in the mass at the top of the port, also serving as a cleat, eliminating the risk of unscrewing the cleat and stealing of your jet ski
Two built-in side handles
Raised bow to avoid overshooting

The head of the port is equipped with 6 pockets to receive couplers allowing connection to other Jet Ports or dock sections, or half couplers allowing attachment of anchoring systems or accessories. The deck of the Jet Port is slip resistant.

ANCHORING TO A WHARF

The Jet Port can be secured to the wharf by combination of the following equipment:

On the port: two rotomolded polyethylene brackets, 1 anchor point to pontoon incorporated to the part. (ref RDS-07110.)
On the platform: two polyurethane brackets (ref RDS-07450.)
Brackets are connected by galvanized steel tubes, section 90 mm with decorative cap (ref CDY-12610.). Tubes are screwed to the polyurethane bracket and slide into the polyethylene brackets what allows the port to monitor the possible water fluctuation.

ON PIPES TO BE SCREWED

This type of anchoring is suitable for sites with soft bottom allowing manual screwing of the pipes, where water depth is at most 3 meters and with moderate operating conditions. Anchoring achieved by the combination of the following equipment:

On the port: two rotomolded polyethylene brackets, 1 anchor point to pontoon incorporated to the part. (ref RDS-07110.)
Galvanized steel tubes, section 90 mm with decorative cap (ref CDY-12610.). Tubes slide into the polyethylene brackets what allows the port to monitor the possible water fluctuation.