-
1068592 KEY, DECK PLATE CAP Perko key for the waste fill, gas or petrol fill, diesel fill and water fill. -
MARINCO 16A 230V WEATHERPROOF CONNECTOR COVER -
25mm Socket for Stainless Steel Flag Staff -
MARINCO 32A 230V WATERTIGHT CONNECTOR CAP -
Sale!
TREM ADJUSTABLE SEAT PEDESTAL 250-320mm TREM WHITE ADJUSTABLE SEAT PEDESTALS Part No 6-20222 Height Inside 400-600mm Base Dia 240mm -
Sale!
TREM ADJUSTABLE SEAT SLIDER 20x38mm ADJUSTABLE SEAT SLIDER By TREM. Universal Fitting 20 x 38cm, 1.6kg -
Sale!
TREM S/S AUXILLARY OUTBOARD BRACKET Pad made of thermoplastic material with high mechanical resistance. Made in stainless steel or anodised aluminium Stainless steel spring Provided with a 5 positions safety stop device -
Sale!
TREM S/S AUXILLARY OUTBOARD BRACKET Pad made of thermoplastic material with high mechanical resistance. Made in stainless steel or anodised aluminium Stainless steel spring Provided with a 5 positions safety stop device -
Sale!
TREM ALUMINIUM OUTBOARD BRACKET MAX 20HP ALUMINUM OUTBOARD BRACKET Can be bolted to the transom. 6-20564 converts 6-20563 in to a removable bracket for stowage. Max HP: 20 Max Engine Weight: 35Kg Weight: 4.8Kg -
TREM S/S OUTBOARD MOTOR TUBE LOCK OUTBOARD MOTOR TUBE LOCKS Made of stainless steel with brass padlock. -
TREM S/S OUTBOARD MOTOR TUBE LOCK OUTBOARD MOTOR TUBE LOCKS Made of stainless steel with brass padlock. -
TREM S/S OUTBOARD MOTOR TUBE LOCK OUTBOARD MOTOR TUBE LOCKS Made of stainless steel with brass padlock. -
Sale!
TREM OUTBOARD TILLER EXT HANDLE OUTBOARD TILLER EXTENSION Made of anodised aluminium with plastic handle. -
Sale!
TREM OUTBOARD MOTOR TROLLEY MAX 60Kg Manufactured in galvanised steel pipe. Supplied with wooden board 43cm Two wheels tank holder and strap. Wheel Diameter: 260mm Max Weight: 60kg Height: 90cm Weight: 10kg -
Sale!
TREM SPARE WHEEL FOR 6-22007/10/16/20 Manufactured in galvanised steel pipe. Supplied with wooden board 43cm Two wheels tank holder and strap. Wheel Diameter: 260mm Max Weight: 60kg Height: 90cm Weight: 10kg -
Sale!
MARINCO 16A 230V INLET S/S EZ LOCK c/w ENCLOSURE -
Sale!
MARINCO 16A 230V INLET STANDARD EZ LOCK c/w ENCLOSURE Easy Lock™ system Glass-filled polyester Watertight Rear safety enclosure with strain relief -
Sale!
MARINCO 16A 230V FEMALE CONNECTOR EZ LOCK Corrosion resistant contacts and terminals Use with cover 8-45004 and cap 8-45005 (16A), or 8-45054 and 8-45055 (32A) -
Sale!
MARINCO 16A 230V WEATHERPROOF CONNECTOR COVER Use with 8-45003 (16A) or 8-45053 (32A) -
Sale!
MARINCO 16A 230V WATERTIGHT CONNECTOR CAP For use on 16 or 32 amp products for CE compliance -
Sale!
MARINCO 16A 230V CONNECTOR KIT c/w 8-45003 8-45004 8-45005 Includes female connector, weatherproof cover with threaded ring and watertight cap. -
Sale!
MARINCO 32A 230V INLET S/S EZ LOCK c/w ENCLOSURE -
MARINCO 32A 230V INLET STANDARD EZ LOCK c/w ENCLOSURE -
MARINCO 32A 230V INLET CONTOURED EZ LOCK c/w ENCLOSURE -
MARINCO 32A 230V FEMALE CONNECTOR EZ LOCK -
MARINCO 32A 230V WEATHERPROOF CONNECTOR COVER -
MARINCO 32A 230V WATERTIGHT CONNECTOR CAP -
MARINCO 32A 230V CONNECTOR KIT c/w 8-45053- 8-45054- 8-45055 -
This Anchor Line, 30m, White is perfect for boats up to 28' without a windlass. -
Sale!
- H07BQ-F 3G 2.50mm2 harmonized cable
- IEC 60309 plug 2P+E [6H], 250V/50Hz
- Watertight connector sealing cap for CE compliance
- NEMA L5-30 moulded connector with LED power indicator light.
- Available in 10,15,20,25 metres to suit your vessel
- Most commonly sold at 15 metres with a Bayliner boat from new (part no #1701611)
-
Sale!
BRAVO 4 ALU R.E.D.HAND PUMP 800mbar (Reduced Effort Device) Double-action hand pump Anti-sand cover gasket Inflates and deflates Capacity 2 x 2000cc Dimensions: 11 x 22 x 47cm Max pressure 800 mbar (11.6 psi) Suitable for inflatable boats and kayaks Automatic switch from double action into single action over 400 mbar in order to reduce the effort at higher pressure. -
Incredibly high quality and hard wearing.
-
Incredibly high quality and hard wearing.
-
Incredibly high quality and hard wearing.
-
Incredibly high quality and hard wearing.
-
Incredibly high quality and hard wearing.
-
Incredibly high quality and hard wearing.
-
Perfect for flushing out your outboard engine after use. Very easy to use - plug in the water and off you go. -
This kit enables you to inflate fenders and buoys quickly and restore them to their correct pressures using a simple car foot-pump or garage air line.- Minimum effort with maximum effect
- Comprehensive list of components
- Invaluable as another item to be kept in your locker
- Kit contains pump adaptor/inflating needle, spare valve, spare plugs and bung
-
1.5 metres long with a pre-spliced loop end for easy fender attachment -
1.5 metres long with a pre-spliced loop end for easy fender attachment
-
1.5 metres long with a pre-spliced loop end for easy fender attachment
-
Out of stock
Heavy Duty Under Table Mount Pedestal Base Additional Under Table Mount Pedestal Base for HILO Table Leg Suitable for mounting underneath the table top and/or on the deck -
Sale!
The Kru reputation sells these lifejackets. Equally suitable for recreational navigation and for professional or industrial applications -
Sale!
The Kru reputation sells these lifejackets. Equally suitable for recreational navigation and for professional or industrial applications
-
Sale!
The Kru reputation sells these lifejackets. Equally suitable for recreational navigation and for professional or industrial applications -
Transfers liquid using jiggle action. Continuous movement sucks fluid up an anti-static pipe. For a wide range of usages, from petrol to draining fish tanks.SPECIFICATION Brand Laser Manufacturer Guarantee 1 Year Guarantee Pack Size 1 Pieces in Pack/Case 1 Product Diameter 20 mm Product Length 1.75 m Product Type Jiggle Siphon Hose
